FUN ELECTRONICS KITS.
Each kit contains components ready for assembly on the pcb. Solder and enjoy.
An instruction sheet is included in every kit.  These kits run on 9-Volt batteries but are not included in the price.

ScanKSFlasher3.jpg (19189 bytes) DUAL VARIABLE FLASHING LEDS     KS1000
This kit is the first in the series of low cost electronics kits for
Australian Schools.Price per kit is $4.35 + GST and postage.
When sold in lots of 25+, cost per kit is $4.00 + GST and postage.
Two red LEDS flash alternatively when a 9v battery (not supplied)
is connected. The speed of the flashes can be varied by adjusting
the two trimpots.  An instruction sheet is included with each kit.
KS1002.jpg (75956 bytes) 555 DUAL VARIABLE FLASHING LEDS     KS1002
This kit uses a very popular 555 timer integrated circuit to
alternatively flash two light emitting diodes over a wide range
of on/off times.  The speed of the flashes can be varied by adjusting
the two trimpots.  You can connect an optional buzzer (not included)
which will make interesting sounds. (While stocks last).
Price per kit is $6.20 + GST and postage.
When sold in lots of 25+, cost per kit is $6.00 + GST & postage.
To be discontinued. 17 units left in stock.
wpe5.jpg (41273 bytes) DELUXE TWO TONE DOOR BELL KS1006
When you press the button a particular tone sounds in the speaker
followed by a different tone as you release the button. Hence the
name Two Tone Doorbell. The 9 Volt battery is not included in the
kit.  However, we do include an instruction sheet complete with
extra work and investigations for students.
When sold in lots of 25+, price per kit is $7.30 + GST & postage.
Single kits $7.65 + GST + postage.

TWO STATION WIRED INTERCOM KS1007 Discontinued.

scanKS1010new.jpg (30480 bytes) FM WIRELESS MIC. KS1010
Used for any kind of remote monitoring of sounds.This project
consists of a simple condenser microphone, which is used to
modify the output of a small radiotransmitter. The transmitter
works in the 88MHZ to 108MHz broadcast band, so you can
use a FM radio receiver to pick up signals.
Price per kit is
$7.15 + GST and postage. When sold in lots of 25+, cost per
kit is $6.85 + GST & postage.
9V battery not supplied.
KS1020.jpg (67253 bytes) ELECTRONIC SIREN MK11 KS1020
This kit features a switchable 'Hee Haw' or single tone and
variable pitch.  The sound is quite loud and you can have a
lot of fun with this kit.
This time we use two 555 chips to run the circuit and make
a burglar alarm or a police siren.
An instruction sheet is included.
9-Volt battery not included in any kit.
$8.25 + GST + Postage each
$7.85 + GST +Postage each when sold in lots of 25+.
ScanKSSirenGenerator1.jpg (22051 bytes) SIREN SOUND GENERATOR      KS1023
This one is very popular!
It generates four different emergency sirens ie Hee Haw, Police
Siren, Ambulance & Fire Siren.
The kit includes two switches, speaker & wires, however, the
9-Volt battery is not included.
$9.00 + GST + Postage each.
$8.60 + GST +Postage each when sold in lots of 25+.
KS1030.jpg (77815 bytes) CECIL CICADA      KS1030
Cicadas are annoying insects that like to make lots of noise,
especially in the dark. Our Cecil Cicada can be trained to do
as he is told. You can control the amount of light that makes
him chirp and make him sound the way you like. Hide him in
someone's bedroom and watch the fun! If the light goes on
Cecil goes quiet and is difficult to be found. (While stocks last).
9-Volt battery not included in any kit.
$11.25 + GST + Postage each.
$10.65 + GST +Postage each when sold in lots of 25+.

wpe6.jpg (16171 bytes)

ROLLING LED DIE            KS1035
When you press the Push-switch, the seven LEDS flicker
and then some will light up and others remain off.
Whether the LEDS are ON or OFF is purely at random.
Hence your Dice could give any number from 1 to 6.
Great for board games!
An instruction sheet is included.
9-Volt battery not included in any kit.
$8.25 + GST + Postage each.
$7.80 + GST +Postage each when sold in lots of 25+.

CONTESTANT SELECTOR    KS1037 Discontinued.

KS1055.jpg (74594 bytes)

8 LED CHASER    KS1055
Eight LEDS flash in variety of patterns when the program
switch is pressed.   This can be reset by pressing the second
press button switch and different running effects can be
selected by pressing the program switch. The speed of
flashing LEDS can be varied by adjusting the variable
resistor. An instruction sheet is included with each kit.
(While stocks last).
Battery not included.
$9.40 + GST + Postage each.
$8.90 + GST +Postage each when sold in lots of 25+.

scanKS1060new.jpg (39589 bytes)

SOUNDS FX KIT KS1060
This project enables a range of sounds to be created through
a speaker by varying a potentiometer and a Light Dependent
Resistor (LDR). An example of a few of the sounds that you
can generate are:- dripping tap, outboard motor, motor cycle,
a cricket. Have fun and experiment with other sounds!

An instruction sheet is included with each kit. Speaker
included but not the 9-Volt battery.
$6.30 + GST + Postage each
$5.95 + GST +Postage each when sold in lots of 25+.
    scanKS1063c.jpg (17087 bytes) LDR CONTROLLED MOTOR KIT KS1063 (new kit)
This project involves two transistors and a Light Dependant Resistor. As the amount of light falling on the LDR decreases, the resistance increases. This slows the electric motor and it stops completely when it is dark. When the light increases the speed of the motor increases at the same rate. Hence you have control over the speed of the motor. Lots of applications for this kit!
2 x AA batteries not included.
$8.25 + GST + Postage each
$7.85 + GST +Postage each when sold in lots of 25+
Further applications of KS1063.
1. Put two units in parallel and team them up with a dual motor gearbox. Create a light seeking or light avoiding bug.
2. Create a 'White line' or 'Black line' Tracker using two units.

................Each kit comes with a detailed instruction sheet written for students. These sheets explain how to assemble the kits and how they work..............................

If you can not see our navigation on the left click here